Cocktail Audio™ UK Support Forum

I add stations to my I-radio list from the web interface.
I can see the station logo on the web interface. I have added it by the logo url.
But on the X10 it plays the station but can't show the logo.
What could be the reason? Is there a way to add it manually by jpg file?

I'd also like to know how to address this on the X30.

...for example you want to show Hundertwasserhaus of Friedensreich Hundertwasser (Artist) or a fav conductor or radio logo etc.
Paste the url into the web-gui simple (img section):

Vienna:
http://www.worldofwanderlust.com/wp-con ... rhaus1.jpg

Sir Simon Rattle:
https://arcanadotfm.files.wordpress.com ... hony-6.jpg

Whatever is befitting ...

For the X30, although the instructions provided mean that the image I uploaded does show on the web interface, I still get a "No Logo" message when playing the internet radio station.

It doesn't matter whether I play it from My Favourites or directly from the list of radio stations.

Any other ideas?

Try selecting another radio & then back to the one you prefer it will show.
Try clearing the cache on the browser or load a smaller img or a bigger one - it depends on the url.
It does work - 90%.

This isn't a browser issue - this is about showing the station logo on the X30 itself.

freemartial,

apologies, it did finally work after trying a number of different images. I can find no logic behind those images that do work and those that do not.

@fidot
I meant try switching station on the box not through the web-interface.
Use an average size url img & it will show.
Or a Url from the station to test it.

So, 7 years later......
I dusted off my X10 and set about adding some internet radio streams. I hit the exact same issues discussed here i.e. no pattern to which station logos show up on the X10 and which only show in the web interface.
I ended up putting the logos on the X10 hard disk and that 100% works, plus you get to design your own if you want.
On the off chance that someone needs details, just ask!